The CORD 13-19 mm strapping kit bundles a manual strapping tool, composite textile strap, clips and a dispenser cart into a single purchase. When you run a warehouse or production line that straps pallets by hand, sourcing each component separately costs time and risks ending up with parts that do not fit. A tool that does not match the strap width, or clips sized for a different strap, creates problems on the packing line before the first pallet leaves the dock.
Problems the CORD 13-19 mm strapping kit eliminates
Without a matched set of tool, strap, clips and cart, several issues slow pallet strapping down:
- Ordering each component from different sources increases lead time and the chance of receiving incompatible parts.
- Loose or poorly tensioned straps cause load shifts during transport, raising the risk of damaged goods.
- Working without a mobile cart means carrying heavy strap rolls to the pallet, adding physical strain for the operator.
- Clips that do not match the strap width produce weak joints that can open under load.
How the CORD 13-19 mm strapping kit works
The CORD manual tool accepts composite textile strap from 13 mm to 19 mm wide. Two 16 mm composite strap rolls are supplied, each 600 m long. You tension the strap and seal it with a clip using the tool by hand. A total of 1000 clips in 16 mm size are included.
The strapping cart holds the strap roll for dispensing. It accepts textile, composite and cord strap, so you can load a different roll if you change strap type within the tool’s width range.
Where this strapping kit fits and where it does not
This CORD 13-19 mm strapping kit suits production, warehouse and logistics operations that strap pallets by hand with composite textile strap. The tool covers widths from 13 mm to 19 mm, so you can later move to a narrower or wider strap without replacing it.
The kit is not designed for steel or plastic strap. Because the tool is manual, it does not suit automated strapping lines. If your daily pallet count requires powered tensioning, you will need a battery or pneumatic strapping tool.
What to check before you order this CORD 13-19 mm strapping kit
- Strap material: composite textile strap is included and is the type this tool is designed for.
- Strap width: the supplied strap is 16 mm wide; the tool accepts widths from 13 mm to 19 mm.
- Strap length: two rolls of 600 m each are included.
- Clips: 1000 clips for 16 mm strap are in the kit.
- Cart: one dispenser cart for textile, composite and cord strap is included.
- Power supply: none needed. The tool is fully manual, with no battery or air connection required.
