Pallet strap threader B190cm: feed strap under pallets without kneeling
The pallet strap threader B190cm is a manual tool that holds plastic strap in a clip head and guides it under a pallet base along a flexible rod. If your operators currently push strap under pallets by hand, they spend time crouching, adjusting stuck strap and repositioning themselves around the load. This tool replaces that routine with a single standing action.
Why strap threading under pallets costs you time and causes strain
Feeding strap beneath a loaded pallet by hand means an operator must bend or kneel for every loop. On a shift with dozens of pallets, this adds up to significant physical strain on the back and knees. Without a pallet strap threader, strap often catches on pallet boards or curls away from the intended path, forcing the operator to re-feed it. Each delay reduces the number of pallets strapped per hour, and inconsistent strap placement can leave loads poorly secured during transport.
How the pallet strap threader works and what it changes
The B190cm consists of a 190 cm fibre rod and a curved polyurethane clip head measuring 12.8 cm × 4.3 cm × 6.8 cm. You clip the end of the strap into the head, slide the rod under the pallet, and pull the strap through from the other side. The curved head shape moves over pallet rails without snagging, so the strap arrives at the far side without jamming.
- Rod length: 190 cm, made from highly flexible fibre
- Clip head material: durable polyurethane
- Compatible strap: PP, PET and other types, up to 25 mm wide and 1.5 mm thick
- Net weight: 185 g, gross weight: 570 g
At 185 g net, the tool adds almost no fatigue even over a full shift. No battery, air supply or cable is needed. The operator stays on their feet throughout, which reduces repetitive bending and the injury risk that comes with it.
Where the pallet strap threader fits and where it does not
This tool suits manual strapping in warehouses, production floors and logistics centres where pallets are secured with PP, PET or other plastic strap.
- Accepts PP, PET and other strap types
- Strap must not exceed 25 mm width or 1.5 mm thickness
- Rod length: 190 cm
- Fully manual, no power source needed
What to check before you order this pallet strap threader
Confirm that your strap does not exceed 25 mm width and 1.5 mm thickness. The rod is 190 cm long. No power source is required: this is a fully manual tool.
- Overall dimensions: 190 cm × 4.3 cm × 6.8 cm (L × H × W)
- Rod material: highly flexible fibre
- Clip material: polyurethane
- Carton size: 75 cm × 41 cm × 5.5 cm
