The woven strap dispenser Ø76 mm is a steel cart that keeps your textile or woven bands organised and ready to pull. If you run packaging or bundling tasks on a warehouse floor, in a shipping area or along a production line, loose strap coils cost you time, create tripping hazards and produce tangled material that must be cut and thrown away. This cart gives you a fixed dispensing point: the strap stays off the ground and feeds cleanly each time you pull.
Why you need a woven strap dispenser at your packing station
Textile and woven bands left on open coils are hard to control. A coil on the floor unrolls, picks up dirt and wraps itself around pallets, legs or equipment. Operators have to stop, untangle the strap and restart. Every interruption slows the line. The consequences add up:
- Lower throughput at every packing station
- More material waste from knotted or damaged strap
- Higher risk of trips and hand injuries from pulling tangled bands
- Uneven bundles caused by inconsistent strap lengths
These problems multiply with the number of strapping cycles per shift. A dedicated holder removes them at the source.
How this woven strap dispenser works and what it changes
The cart accepts textile or woven strap rolls with a Ø76 mm inner diameter on its steel holder. You load the roll, place the cart beside your work area and pull out the length you need. The band unwinds freely without dragging on the ground or knotting. Because the strap remains on the holder rather than lying loose, you get a consistent pull and reduce waste from damaged lengths.
A built-in toolbox keeps your clips and tools together with the woven strap dispenser. The steel frame measures 350 × 350 × 450 mm and weighs 3.5 kg empty, so it is simple to move between stations. Loaded, the cart supports up to 20 kg of strap.
Where the woven strap dispenser fits your operation
This cart suits warehouse floors, shipping areas and production lines that use textile or woven bands with a Ø76 mm inner diameter. It requires no power supply or compressed air, so you can position it anywhere without cables or hoses.
The dispenser does not accept other strap diameters or materials. If your rolls have a different inner diameter, you need a different holder. Check the inner diameter printed on your strap coil before ordering.
What to check before you order this woven strap dispenser
- Strap compatibility: textile or woven strap with Ø76 mm inner diameter only
- Cart dimensions: 350 × 350 × 450 mm
- Empty weight: 3.5 kg
- Loaded weight: up to 20 kg
- Frame material: steel
- Power: none required
The cart is supplied on its own. Strapping tools, clips and strap material are ordered separately.
