The TES PRO PP strapping kit is a single-order package that gets you from unpacking to strapping without sourcing parts separately. Many warehouses and production floors still strap pallets by hand with a manual tensioner, metal seals and a crimping tool. That process is slow, the joints can slip, and metal seals add cost to every strap cycle.
Problems the TES PRO PP strapping kit solves
Manual PP strapping on a busy floor has several weak points:
- Each strap cycle requires feeding, placing a metal seal, hand-tensioning and crimping, which adds labour time across the day.
- Metal seals are a running expense and leave sharp edges on the finished package.
- Repeated hand-tensioning causes wrist and shoulder strain, especially across a full shift.
- Pneumatic tools remove some of these problems but tie you to a compressor and an air hose, limiting your reach on the floor.
How this PP strapping kit works
The kit centres on the TES PRO battery strapping tool for 12–16 mm PP and PET strap (0.4–1.2 mm thick). You feed the strap around the load, place the free end in the tool, and it tensions and seals the joint. The seal is a friction weld: the tool vibrates the overlapping strap layers together, eliminating metal seals entirely.
Tension force is adjustable from 900 to 3200 N. Welding time runs from 1 to 5 s. Both values are set through a digital display. Tensioning speed is 100 to 200 mm/s. The tool itself weighs 3.1 kg and measures 380 × 130 × 130 mm.
Two 14.4 V / 4 Ah Li-ion batteries ship with this PP strapping kit. Each battery delivers around 200 cycles on a single charge. While one is in the charger, the other keeps you working.
Where the TES PRO PP strapping kit fits and where it does not
This kit is made for pallets, boxes and bundles of light to medium weight that you secure with PP strap. If your loads demand tension above 3200 N, or you work with steel strap, you need a different tool. The TES PRO also accepts PET strap from 12 to 16 mm, but this particular kit ships with PP strap only.
What to check before you order your PP strapping kit
Three variants are available, each with a different coil of PP strap:
- 12 × 0.8 mm, 2000 m
- 15.5 × 0.7 mm, 2000 m
- 15 × 0.8 mm, 1800 m
All coils sit on a 406 mm core. Every variant ships with the TES PRO tool, two batteries, a charger and the dispenser cart. The cart accepts PP and PET strap from 10 to 19 mm on a 405/406 mm core and includes a tool box (370 × 200 × 100 mm). Cart dimensions are 400 × 550 × 1050 mm; cart weight is 17 kg.
Because the tool friction-welds the joint, you do not need to stock metal seals or buckles.
