ITI 71 composite strapping kit: one shipment, ready to strap
The ITI 71 composite strapping kit brings together a battery tensioner, a coil of composite strap, a box of wire buckles and a dispenser cart in a single consignment. If you manage a warehouse or production line that ships large crates, machines, pipes or timber in containers and trucks, you face a familiar task: you need the right tensioner, the matching strap width and the correct buckles, all at once. Ordering each part from different sources means delays, mismatched widths and wasted money.
What goes wrong without this composite strapping kit
Steel strap rusts in transit and can cut into the edges of goods, leading to product damage and repackaging costs. Switching to composite strap removes those risks, but it introduces another one: getting the wrong combination of tensioner, strap width and buckle size. A 25 mm coil paired with 19 mm buckles is useless. Sourcing the dispenser cart separately adds yet another order and another possible mismatch.
Without a matched kit you lose time coordinating deliveries, verifying specifications and correcting errors before a single strap goes around a load.
How the ITI 71 composite strapping kit works
At its core is the ITI 71 battery tensioner. It accepts textile and composite (cord) strap from 16 to 40 mm wide and 0.5 to 1.5 mm thick. Tension force reaches up to 11 000 N, and tensioning speed is 6.5 m/min. The tool measures 400 × 135 × 190 mm and weighs 5 kg.
Every kit ships with the following items, matched to one strap width:
- ITI 71 battery tensioner
- 2 Li-ion batteries (18 V / 5 Ah) plus charger; each battery charges in roughly 40 minutes
- 1 coil of composite strap on a 200 mm core (19 mm / 500 m, 25 mm / 500 m or 32 mm, depending on the variant)
- 1 box of wire buckles sized to the strap (19 mm: 1 000 pcs, 25 mm: 500 pcs, 32 mm: 250 pcs)
- HC2 dispenser cart for cord, composite and PP strap, for a 200 mm core, with a maximum load of 50 kg
The cart feeds the strap without twisting, so you move from load to load quickly.
Where this kit fits and where it does not
This composite strapping kit is designed for securing loads in containers and trucks: large crates, machines, pipes and timber where steel strap would damage the goods. Composite strap does not rust and does not cut into edges the way steel can.
Points to bear in mind:
- The tensioner covers strap from 16 to 40 mm wide and 0.5 to 1.5 mm thick. Applications outside that range need a different tool.
- The HC2 cart is rated for a maximum load of 50 kg and is designed for coils with a 200 mm core.
- No steel strap or metal seals are included. The kit is built around composite and textile strap with wire buckles.
What to check before you order your ITI 71 composite strapping kit
Three variants exist, each defined by the included strap width: 19 mm, 25 mm or 32 mm. The tensioner itself handles any composite or textile strap from 16 to 40 mm, but the coil and buckles shipped with the kit match only the width you select.
Before ordering, confirm:
- Which strap width suits your load size and your existing buckles, if any
- Two batteries and a charger are part of every kit, so no separate battery purchase is needed to get started
- Strap, buckles and seals can be ordered separately for larger quantities or a different width later
