Why you need a TES EXTREME strapping kit for heavy loads
The TES EXTREME strapping kit puts a high-tension cordless strapping tool, two batteries, a charger, a coil of PET strap and a dispenser cart into one shipment. If you secure steel beams, concrete products, stone slabs, large machine parts or export crates, you need wider strap, higher tension and a friction-weld seal that does not rely on metal seals.
The problems this TES EXTREME strapping kit addresses
- Wide 19–25 mm PET strap requires a tool built for that range; a tool rated for narrower strap will not accept it.
- Metal seals add cost per joint and can scratch finished surfaces or cut through packaging under vibration.
- Working without a dispenser cart means the coil unrolls on the floor, tangles and slows every cycle.
- A single battery may not last a full run; waiting for a recharge halts the line.
These problems raise the risk of a load arriving damaged and cost time on every strap cycle.
How the TES EXTREME strapping kit works
The tool accepts PET and PP strap from 19 mm to 25 mm wide and 0.8 mm to 1.2 mm thick. It tensions the strap with an adjustable force range of 400–5000 N at a tensioning speed of 180 mm/s, then creates a friction-weld seal without metal seals or buckles. The tool itself measures 350 × 135 × 170 mm and weighs 4.32 kg. Two 14.8 V / 4.0 Ah Li-ion batteries are included; while one powers the tool the other charges. Charging time is 90 minutes per battery.
The dispenser cart holds the strap coil, feeds strap without twisting and keeps the tool within reach. You pick the variant when you order, and the cart is matched to the strap width automatically.
Where the kit fits and where it does not
This strapping kit is built for the heaviest loads: steel, stone, concrete products, large machine parts and export packaging. It handles PET and PP strap in the 19–25 mm range. If your application calls for strap narrower than 19 mm, this tool is not the right choice; a lighter model for narrower strap would suit better.
The tool is cordless, so there is no air hose or compressor needed.
What to check before you order a TES EXTREME strapping kit
You choose one of two variants at checkout:
- 19 mm variant: one coil of PET strap 19 × 1.0 mm / 1000 m on a 406 mm core, plus the dispenser cart for 10–19 mm strap with a tool box (370 × 200 × 100 mm). Cart dimensions: 400 × 550 × 1050 mm, weight 17 kg.
- 25 mm variant: one coil of PET strap 25 × 1.2 mm / 600 m on a 406 mm core, plus the PRO dispenser cart on four wheels, accepting cores of 200/280/405/406 mm.
Both variants include the TES EXTREME tool, two batteries, a charger and the coil of strap. The narrower cart does not accept 25 mm strap, so the 25 mm variant always ships with the PRO cart. If you need additional coils of strap or other consumables, contact us before placing the order so we can add them to the same consignment.
