Strapping Station with Tool Balancer, PRO Cart, Column 2.21 m

This strapping station with tool balancer brings together a PRO dispenser cart, the strapping tool you select and one coil of PET strap in a single consignment. If your packing line straps many pallets a day, the way the tool, the coil and the consumables are organised between straps affects both throughput and operator fatigue.

What a strapping station with tool balancer changes on your packing line

Without a dedicated setup, operators place the strapping tool on the floor or on a table between straps. That means bending, lifting and repositioning it again and again. Strap coils left loose on the ground unwind unevenly, tangle and pick up dirt. Clips and adhesive tape end up scattered around the work area. These small delays add up, and the repetitive lifting puts load on the operator’s wrists, arms and shoulders.

How the PRO cart and balancer arm keep the tool at the pallet

The PRO dispenser cart sits on a 65 × 80 cm base with four wheels. It carries the strap coil and feeds it with a brake that prevents unwinding. A column rises to 2.21 m and supports a 1.2 m arm with a balancer at the end. The balancer holds the strapping tool suspended at pallet height, so the operator grasps it, straps the load and releases it without lifting or bending.

A clip tray (43 × 17 × 9.5 cm) on the cart keeps consumables within reach, and a holder stores adhesive tape. The cart brings tool, strap coil and consumables into one mobile strapping station with a tool balancer. All tools in this setup join the strap ends by friction weld, so metal seals are not needed.

Where a strapping station with tool balancer fits and where it does not

This setup is made for packing lines where many pallets are strapped each day. The cart rolls on four wheels, so one station can serve several positions along the line. It accepts PET and PP strap on cores of 200, 280, 405 or 406 mm. It is not suitable for steel strap.

Select the tool to match the strap width your loads require:

• 9–16 mm: NEO2, GT SMART Plus, SIAT VIPER
• 10–16 mm and 12–16 mm: GT-ONE, ARGON, TES PRO, MB620, JET
• 13–19 mm: ARGON PLUS, AIR19 (pneumatic)
• 16–19 mm: NEO Plus, TES Plus, GT-XTREME, MB820
• 19–25 mm: TES EXTREME

What to check before you order

Each strapping station with tool balancer variant ships as one consignment. The package contains:

• The strapping tool you select when ordering
• Battery and charger for every battery tool (NEO Plus, TES Plus, TES PRO and TES EXTREME include two batteries); the AIR19 requires compressed air
• One coil of PET strap on a 406 mm core, matched to the tool: 15.5 × 0.7 mm / 1750 m or 19 × 1.0 mm / 1000 m
• PRO dispenser cart with column, arm and balancer

Decide which strap width your loads need, then choose the matching tool variant. If you pick the AIR19, make sure compressed air is available at your packing point.