The AIR19 strapping kit pairs an air-powered strapping tool with a coil of strap and a mobile dispenser cart. If your warehouse or production floor sends out pallets every day, matching tool, strap and transport yourself costs time and risks ordering incompatible parts.
What goes wrong without an AIR19 strapping kit
Hand-tensioned strapping is slow and produces inconsistent tension from one pallet to the next. Uneven tension increases the chance of loads shifting during transport, leading to damaged goods and rejected shipments. Common issues include:
- High cycle time per strap when tensioning manually
- Operator fatigue accumulating over a full shift
- Variable strap tension causing loose or over-tightened loads
- Extra cost from product damage and wasted strap material
A pneumatic tool removes the physical effort of tensioning. However, the tool alone is not enough: you also need the correct strap and a way to transport the coil to each pallet.
How the AIR19 strapping kit works
The kit contains three matched components:
- AIR19 pneumatic strapping tool, accepts PET and PP strap from 13 to 19 mm wide
- Strap coil (the included variant determines material, width and length)
- Dispenser cart suitable for PP or PET strap coils
The tool draws its tensioning force from your compressed air supply instead of the operator’s arms. The dispenser cart holds the strap coil and rolls alongside the operator to each pallet, so nobody has to carry the coil by hand. Because everything in the AIR19 strapping kit is pre-matched, there is no guesswork when you unpack the set.
Where the AIR19 strapping kit fits and where it does not
This kit is intended for industrial pallet strapping with PET or PP strap in widths from 13 to 19 mm. It suits manual and semi-automated packaging lines where an operator moves from pallet to pallet. It is not designed for fully automated strapping systems. If you need strap widths outside the 13 to 19 mm range, a different tool is required.
The AIR19 is air-powered, so you need a compressed air connection at your strapping station. It does not run on a battery: there is no charging time to plan for, but you are limited to locations with an air line.
What to check before you order your AIR19 strapping kit
The kit is available in several variants that differ by strap material, width, thickness and coil length. Review these points before placing your order:
- Strap material: the AIR19 tool handles PET and PP strap. Variants include PET and PP coils.
- Strap width: the tool covers 13 to 19 mm. Available coil widths are 15.5 mm and 19 mm, depending on the variant.
- Air supply: a compressed air line must be available at your strapping station.
- Safety: operators should wear eye protection and protective gloves when using the tool.
Specifications
| Parameter | Specification |
|---|---|
| Strap type | PET / PP |
| Strap width | 15.5 mm |
| Strap thickness | 0.7 mm |
| Strapping tool model | AIR19 |
| Strapping tool strap width range | 13 – 19 mm |
| Tool type | Pneumatic |
| Included accessories | Dispenser cart for PP or PET strap |
| Warranty | Yes |
| Service location | Europe |
| Shipping | Free shipping within EU |
