JET 15.5 mm strapping kit: one order instead of four
The JET 15.5 mm strapping kit brings together a battery strapping tool, a coil and a dispenser cart in a single consignment. If you run a warehouse or shipping department that straps pallets and bundles with PET or PP strap, you know that sourcing each component on its own means checking widths, core diameters and voltages across several suppliers and deliveries.
Problems this strapping kit removes from your workflow
Ordering parts individually opens the door to mismatches and delays:
- A coil with the wrong core diameter will not sit on the cart, causing uneven feeding and jams.
- Strap outside the tool’s 12–16 mm width range cannot be tensioned or sealed.
- Without a cart, the coil rests on the floor, unwinds freely and creates a trip hazard.
- A missing battery or charger stalls the first shift until the correct component arrives.
Each mismatch translates directly into idle time at the packing line and loads leaving the dock without a secure strap.
How the JET 15.5 mm strapping kit works in practice
The kit groups four matched components. The JET battery strapping tool handles PET and PP strap from 12 to 16 mm wide (0.6–1.0 mm thick) and produces a friction-weld seal in 1–3 s with tension up to 214 kg. The tool weighs 2.75 kg. Power comes from a 14.4 V / 3 Ah Li-ion battery that delivers roughly 300 straps per charge; a full recharge takes about 70 minutes. One coil of 15.5 mm strap on a 406 mm core is included, selected at order time from the variants listed below. The dispenser cart accepts PET and PP strap from 10 to 19 mm on a 405/406 mm core, with a built-in tool box (370 × 200 × 100 mm). Cart dimensions are 400 × 550 × 1050 mm at a weight of 17 kg. Because no compressed-air line or mains cable is needed, you can move freely around the warehouse floor.
Who this strapping kit suits, and when to look elsewhere
The kit is intended for warehouses and shipping departments that strap pallets and bundles with 15.5 mm strap. It covers PET and PP widths from 12 to 16 mm. If you require steel strap or widths above 16 mm, a different tool is needed.
What to verify before ordering the JET 15.5 mm strapping kit
When you place the order you select one of three strap variants:
- PP 15.5 × 0.7 mm / 2000 m
- PET 15.5 × 0.7 mm / 1750 m
- PET 15.5 × 0.9 mm / 1250 m
All three coils share a 406 mm core and fit the included cart. The shipment contains the tool, battery, charger, coil and cart. If you need extra coils or a different strap width, contact us before ordering.
