AIR DUO32 Steel Strapping Kit, Pneumatic, 19–32 mm with Dispenser Cart

The AIR DUO32 steel strapping kit is a pneumatic set that bundles a tensioner, a sealer, one coil of steel strap, a box of metal seals and a dispenser cart. If you strap steel coils, profiles, pipes or timber and have compressed air on site, this kit lets you start work the day it arrives without sourcing each part separately.

What the AIR DUO32 steel strapping kit solves on the work floor

Heavy loads held by steel strap need two things: enough tension to prevent movement and a secure joint. Manual tensioning demands repeated strokes, limits the force you can apply and tires the operator across a full shift. A weak seal can let go in transit, causing load shifts and product damage. Sourcing the tensioner, sealer, strap and seals from different channels risks mismatched widths and delays. A steel strapping kit with matched components removes that risk.

How this steel strapping kit works

The kit contains two air-driven tools. The pneumatic tensioner pulls the strap at up to 85 mm/s and applies up to 8.5 kN of tension force. The pneumatic sealer applies a metal buckle seal to the overlapping strap ends, producing a joint strength of up to 15 kN. Both tools run on compressed air at 0.49–0.63 MPa (4.9–6.3 bar).

The tensioner weighs 4.1 kg, the sealer 3.1 kg. The dispenser cart (model HS5) carries one ribbon-wound coil of steel strap up to 50 kg and feeds it to the work position without twisting. It also keeps both tools at hand.

Where the AIR DUO32 steel strapping kit fits and where it does not

This kit is built for locations where compressed air is piped or a portable compressor is at hand. Typical loads include:

• Steel coils and metal profiles
• Pipes and tube bundles
• Timber packs
• Other heavy goods secured with steel strap

If you work in areas without compressed air, a battery-powered strapping tool may suit you better. The tools handle steel strap only; they are not designed for polyester or polypropylene strap.

What to check before you order this steel strapping kit

You select your strap width at the time of ordering. Three variants are available:

• 19 mm: strap 19 × 0.5 mm, seals 19 × 57 mm (1 000 pcs)
• 25 mm: strap 25 × 0.8 mm, seals 25 × 57 mm (1 000 pcs)
• 32 mm: strap 31.75 × 1.0 mm, seals 32 × 57 mm (800 pcs)

Each variant includes one 25 kg coil of steel strap, one box of matching metal buckle seals and the HS5 dispenser cart. The tensioner accepts steel strap in widths of 19, 25 and 32 mm. The sealer is matched to the width you choose. The AIR DUO32 steel strapping kit ships as a single consignment with the cart included. Strap and seals can be ordered separately when you need to replenish.