BO-51 steel strapping kit: one box, zero excuses
The BO-51 steel strapping kit puts a manual strapping tool, a coil of steel strap and a dispenser cart into a single consignment. It is aimed at warehouse staff and site crews who strap crates, pipe bundles, profiles or timber with light steel strap and need a solution that works without electricity or compressed air.
What goes wrong without a complete kit
Ordering a tool, strap and cart separately means three deliveries, three purchase orders and a risk that something arrives late or does not match. Meanwhile, loads sit unstrapped on the dock. Loose steel strap that has no dispenser kinks and twists as it unwinds, slowing every cycle and creating sharp offcuts on the floor. Seals add a recurring cost and another item to track in stock. Each of these problems is small on its own, but together they eat time and budget.
How this BO-51 steel strapping kit solves it
The BO-51 hand tool tensions, joins and cuts steel strap in one operation. The joint is punched directly into the overlapping strap layers, so no seals are needed. Key figures:
- Strap range: 13–20 mm wide, 0.4–0.63 mm thick
- Maximum tension: up to 4 000 N
- Punched joint strength: up to 8 000 N
- Tool weight: 4.25 kg
The dispenser cart (type HS5) accepts ribbon-wound coils up to 50 kg. It feeds the strap to the tool without twisting and keeps the tool within reach between straps. The cart weighs 15 kg.
Because the tool is entirely manual, there are no batteries to charge, no air lines to route and no cables crossing the floor. You strap wherever the load is, indoors or out.
Where the kit fits and where it does not
This steel strapping kit is made for crates, bundles of profiles, pipes and timber, and other loads strapped with light steel strap, including locations without mains power or compressed air.
Consider a different tool if you need:
- Plastic or textile strap instead of steel
- Strap wider than 20 mm or thicker than 0.63 mm
What to check before you order the BO-51 steel strapping kit
You choose the strap variant at checkout. Two options are available:
- 16 × 0.5 mm steel strap, 25 kg coil
- 19 × 0.5 mm steel strap, 25 kg coil
Each variant ships with the BO-51 tool, the selected coil and the HS5 dispenser cart. No batteries or charger are required because the tool is manual. If you need additional coils or a different strap size within the 13–20 mm range, contact us before ordering so we can add them to the consignment.
