The ARGON 15.5 mm strapping kit puts a battery strapping tool, one coil of 15.5 mm strap and a dispenser cart in your hands as a single shipment. If you run a warehouse or shipping department, sourcing each component from a different supplier means matching strap widths to tool ranges, core diameters to carts and materials to operating gears before you can strap a single pallet.
Loose pallets at the dock: what the ARGON 15.5 mm strapping kit prevents
A strapping tool on its own does not get you strapping. You still need strap in the correct width, thickness and material, wound on a core that fits a cart, and a cart that holds the coil and feeds it without tangling. Get any of those wrong and the tool sits idle while goods pile up unstrapped.
Hand-sourcing each component also brings risk:
- A coil on the wrong core diameter will not sit on the cart.
- Strap that is too thick or too thin jams or slips during tensioning.
- Without a cart, the coil rolls across the floor and the strap kinks.
How the ARGON strapping kit works
At the centre of this strapping kit is the ARGON battery strapping tool, which handles PET and PP strap from 10 to 16 mm wide. It creates a friction-weld seal, so no metal seals or buckles are needed. Three operating modes are available: automatic, semi-automatic and manual. The tool has separate gears for PP and PET strap.
Tensioning speed reaches 11 m/min. Welding takes 1.1–1.4 s. The tool weighs 4 kg and measures 330 × 150 × 140 mm.
Power comes from an 18 V Li-ion battery that delivers up to 700 straps per charge. Charging time is 90 min. One battery and one charger are included.
The dispenser cart accepts coils of 10–19 mm PET or PP strap on a 405/406 mm core. It measures 400 × 550 × 1050 mm and weighs 17 kg. A tool box (370 × 200 × 100 mm) sits on the cart.
Where this strapping kit fits and where it does not
The ARGON 15.5 mm strapping kit suits warehouse and shipping operations where pallets and bundles are strapped with 15.5 mm PET or PP strap. If your application calls for strap wider than 16 mm or narrower than 10 mm, the tool will not accept it. Steel strap requires a different tool entirely.
What to check before you order the ARGON 15.5 mm strapping kit
Two strap variants are available. You select one when placing the order:
- PET 15.5 × 0.7 mm / 1750 m, core 406 mm
- PP 15.5 × 0.7 mm / 2000 m, core 406 mm
Each variant ships with one coil. The shipment contains the ARGON strapping tool (10–16 mm), one 18 V Li-ion battery, one charger, one coil of your chosen strap and the dispenser cart with tool box.
Replacement strap, seals and buckles can be ordered separately. Contact us to add them to your order.
