SIAT VIPER strapping kit: one shipment, ready to strap
The SIAT VIPER strapping kit is a complete set for daily box and pallet strapping. If you run a production line, warehouse or shipping department and need to start strapping quickly, this kit removes the guesswork. You receive the tool, battery, charger, one coil of strap and a dispenser cart in a single consignment. No separate orders, no waiting for missing components.
What slows strapping down without a matched kit
Buying a strapping tool on its own means sourcing strap, a dispenser and consumables separately. This creates delays and compatibility risks.
- Wrong strap width or thickness can jam the tool or produce weak joints.
- Without a cart, operators pull strap from a coil on the floor, causing tangles and wasted material.
- A missing battery or charger holds up the entire operation until spares arrive.
The result is lost time, damaged goods from loose loads, and unnecessary strain on operators who wrestle with mismatched equipment.
How this SIAT VIPER strapping kit solves it
The core of the kit is the VIPER battery strapping tool. It handles PET and PP strap from 9 to 16 mm wide and 0.5 to 1.1 mm thick. It tensions strap at up to 200 mm/s and applies a friction weld seal, so no metal seals or buckles are needed for the joint itself. The tool weighs 3.9 kg and measures 369 × 165 × 123 mm.
Three operating modes are available: automatic, semi-automatic and manual. A soft mode reduces the tension range to 500–1500 N, which suits sensitive goods. In standard mode the tool tensions up to 2700 N.
Power comes from a Makita Li-ion 18 V / 3.0 Ah battery. Charging takes 20 minutes, and one charge delivers 250–350 straps. A 5.0 Ah Makita 18 V battery can also be used, giving 400–550 straps per charge.
The dispenser cart holds PET or PP strap from 10 to 19 mm wide on a 405/406 mm core. It feeds the strap cleanly, preventing twists. A built-in tool box (370 × 200 × 100 mm) keeps accessories together. The cart itself measures 400 × 550 × 1050 mm and weighs 17 kg.
Where the SIAT VIPER strapping kit fits and where it does not
This kit suits production lines, warehouses and shipping departments that strap boxes and pallets daily with PET or PP strap. It covers strap widths from 9 to 16 mm.
- It does not accept steel strap.
- Strap wider than 16 mm or narrower than 9 mm is outside the tool’s range.
- The dispenser cart is built for coils with a 405/406 mm core.
What to check before ordering your strapping kit
You choose the strap variant when you order. Four options are available:
- PP 12 × 0.8 mm / 2000 m
- PP 15.5 × 0.7 mm / 2000 m
- PET 12 × 0.6 mm / 2500 m
- PET 15.5 × 0.7 mm / 1750 m
Each kit includes the VIPER strapping tool, one Makita 18 V / 3.0 Ah battery, a charger, one coil of strap in your selected variant, and the dispenser cart with tool box. If you need additional coils or a different strap size, contact us before ordering so we can add them to your consignment.
