Woven Strap Banding Kit with Cart & Tensioner, 16–32 mm

Woven strap banding kit: one box, every component matched

The woven strap banding kit puts a manual tensioner, a full coil of textile or composite strap, a box of wire buckles and a dispenser cart into a single shipment. If you secure pallets, crates, machines, pipes, timber or cargo inside containers and trucks, you no longer need to source each item from a different supplier and hope the widths and core sizes line up.

The problem a woven strap banding kit solves

Loads that shift in transit damage goods and generate claims. Steel strap can rust and damage the edges of the goods. Sourcing the tensioner, the strap, the buckles and the cart from different suppliers often means mismatched widths, wrong core sizes and delays before the first strap goes on.

• Steel strap rusts and can damage edges of goods
• Mismatched components waste time and cause re-orders
• Electricity, batteries or compressed air are not always available at the strapping point

How this woven strap banding kit works

The kit operates entirely by hand. You loop the strap around the load, tension it with the manual tensioner and close it with a wire buckle. No power source is needed. When you order, you choose one of four widths; every item in the kit is matched to that choice.

• Textile 16 mm: tensioner 13–19 mm (1.12 kg), 850 m coil on a 76 mm core, 1 000 buckles, textile-strap cart for a 76 mm core
• Composite 19 mm: tensioner 19–25 mm (1.18 kg), 500 m coil on a 200 mm core, 1 000 buckles, HC2 cart for a 200 mm core
• Composite 25 mm: tensioner 19–25 mm (1.18 kg), 500 m coil on a 200 mm core, 500 buckles, HC2 cart for a 200 mm core
• Composite 32 mm: tensioner 25–50 mm (1.76 kg), coil on a 200 mm core, 250 buckles, HC2 cart for a 200 mm core

The dispenser cart holds the coil, feeds the strap without twisting and gives the operator a place to keep the tensioner and buckles. The HC2 cart for composite strap has a maximum load of 50 kg.

Where the banding kit fits and where it does not

This kit is made for sites where steel strap would damage the goods and where no power supply is available at the strapping point. Textile and composite strap do not rust and do not cut into edges. It suits pallets, crates, machines, pipes, timber and loads inside containers and trucks.

Because the tensioner is manual, throughput depends on the operator. The kit contains one coil; high-volume users will need additional strap and buckles.

What to check before you order your woven strap banding kit

• Strap width: textile 16 mm, or composite 19, 25 or 32 mm. The tensioner, buckles and cart in the kit are matched to the width you select.
• Core size: textile strap is on a 76 mm core; composite strap is on a 200 mm core.
• Quantity of buckles: the 16 mm and 19 mm kits include 1 000 wire buckles; the 25 mm kit includes 500; the 32 mm kit includes 250.
• Additional consumables: strap, seals and buckles are available separately when you need more.