AIR Metal steel strapping kit with cart, 16–19 mm or 32 mm

Why you need an AIR Metal steel strapping kit for heavy loads

AIR Metal steel strapping kit gives you one parcel with everything required to tension, seal and cut steel strap on heavy goods. If you strap steel coils, profiles, pipes or timber, you already know the problem: a tensioner alone does not close a seal, a separate sealer adds a second tool to handle, and buying strap, seals and a cart one by one delays the first shift. This kit removes that delay.

The problem this air-driven steel strapping kit solves

Manual tensioning of steel strap on heavy loads is slow and physically demanding. Using two separate pneumatic tools, one for tensioning and one for sealing, means picking up and putting down each tool for every strap. Loose or under-tensioned straps let loads shift in transport, causing product damage and rejected deliveries. Without a dispenser cart, the coil sits on the floor, the strap twists, and the operator bends down repeatedly.

• Strap that feeds from a floor coil tangles and kinks
• Under-tensioned straps risk load movement and damage
• Sourcing tool, strap, seals and cart from different suppliers creates mismatches in width or thickness

How this AIR Metal steel strapping kit works

The core of the kit is the AIR Metal combination tool. It runs on compressed air at 0.35–0.6 MPa and performs three functions with one lever: it tensions the strap, closes a steel seal and cuts the strap. Tension force reaches at least 9.8 kN at 0.6 MPa. Tensioning speed is 5.3 m/min.

The strap accepted is steel, 0.8–1.2 mm thick. Each kit variant is matched: the 16–19 mm variant ships with 19 × 0.8 mm steel strap and 19 × 57 mm seals (1000 pcs per box), while the 32 mm variant ships with 32 × 1.0 mm steel strap and 32 × 57 mm seals (800 pcs per box).

The HS5 dispenser cart carries the coil (ribbon-wound steel strap, maximum load 50 kg) and feeds the strap without twisting. The cart weighs 15 kg and keeps the tool within reach during the strapping cycle.

Where this air metal steel strapping kit fits and where it does not

The kit is designed for workplaces where compressed air is already available: loading docks, steel warehouses, sawmills and pipe yards. It suits operations that strap steel coils, profiles, pipes and timber with steel strap.

• Compressed air supply of 0.35–0.6 MPa is required
• Strap width is fixed per variant: 16–19 mm or 32 mm
• Not for plastic or textile strap; a different tool is needed for those materials

The tool needs a compressed air supply at the strapping station.

What to check before you order this steel strapping kit

You order one of two variants. Choose by strap width:

• 16–19 mm variant: steel strap 19 × 0.8 mm, steel seals 19 × 57 mm (1000 pcs), AIR Metal tool for 16–19 mm, HS5 dispenser cart
• 32 mm variant: steel strap 32 × 1.0 mm, steel seals 32 × 57 mm (800 pcs), AIR Metal tool for 32 mm, HS5 dispenser cart

The tool, the strap and the seals in the kit are matched to the width you select. Strap, seals and buckles can also be ordered separately. Confirm that your air supply delivers 0.35–0.6 MPa before ordering. The kit ships as one consignment with the cart included.