The electric strapper MB620 is a battery-powered, fully automatic tool for PET and PP strap between 12 and 16 mm wide. If you manage packing or dispatch, you deal with a recurring problem: keeping strap tension and seal quality consistent across every load, throughout every shift.
What an electric strapper replaces in your packing process
Manual tensioning and sealing with hand tools is slow and varies from operator to operator. Each person pulls to a different tension, so loads leave your facility with uneven strapping. The consequences are familiar:
- Loads shift during transport, causing goods damage and claims
- Operators tire over a shift, widening the variation in strap tension
- Metal seals add material cost that friction welding eliminates
- Time spent on rework and re-strapping cuts into throughput

How the MB620 electric strapper tensions, seals and cuts
The operator wraps the strap around the load, feeds both ends into the tool and presses a single button. The MB620 then tensions, friction-welds and cuts the strap automatically.
Tension is adjustable from 10 N up to 2500 N by turning a dial. A digital display shows operating parameters at all times. Sealing time can be set between 0.3 and 2.7 seconds to suit the strap material and width you are using. The friction weld joint reaches 85 ± 5 % sealing efficiency.
This electric strapper works in both vertical and horizontal positions. A rear-end roller on the base prevents scratches on the strapped surface. A brushless motor drives the mechanism, and the battery supports up to 400 cycles per charge.
Three modes are offered: fully automatic, semi-automatic and a soft setting for fragile items. In semi-automatic mode, the operator presses the button to tension the strap to the desired level. The battery is rated for up to 2000 charges over its lifetime.

Where this electric strapper fits and where it does not
The MB620 is made for operations that strap pallets or bundles with PET or PP strap, 12–16 mm wide and 0.65–1.0 mm thick. It handles both vertical and horizontal strapping positions.
This tool is not suitable for steel strap. If your strap falls outside the 12–16 mm width or 0.65–1.0 mm thickness range, a different model is needed. For tension requirements above 2500 N, choose a higher-capacity tool.

What to check before you order
Before ordering this electric strapper, confirm the following details match your application:
- Strap material: PET or PP only
- Strap width: 12–16 mm
- Strap thickness: 0.65–1.0 mm
- Tension range: 10 N up to 2500 N
- Tool dimensions: 330 × 150 × 130 mm
The package includes the MB620, one battery and a 220 V charger. No additional seals are needed: the tool creates its joint by friction welding the strap overlap directly.
Specifications
| Parameter | Specification |
|---|---|
| Usage | Messersi MB620 battery hand tool 12-16mm (1/2" to 5/8") battery strapping tool for PET and PP strap w/ Battery & Charger |
| Size of the strapping tool | 330x150x130 mm |
| Weight | 3.4 Kg (inc. battery) |
| Features | Fully-automatic battery strapping machine. Safe and friendly to operate. Reliable and affordable. Can be used in a vertical or horizontal position. Fast charging Easy to use and lightweight (3.7 kg including battery). Can be used with PP or PET strapping. Eliminates the use of metal seals |
| Strap width | from 12-16mm (1/2" to 5/8") |
| Strap thickness | 0.65 - 1.0 mm |
| Apply straps | PET and PP strap |
| Seal | high-grade friction weld seal, vibration welding (heating by friction) |
| Maximum tension force | Max Tension: from 10N - 2500N (9-900lbs) |
| Battery | Battery 14.8 V /2.0 A Li-Po complies with UN28.3 requirements |
| Charger | 220V |
| Charging time | 15-30 minutes - up to 400 strappings |






