Corded strapping

Why corded strapping replaces steel on demanding loads

Steel banding rusts in humid stores and open yards, and its cut ends can injure hands. Corded strapping made from polyester fibres removes these risks. It is lighter than steel, non-corrosive and weather-resistant, and it produces no sharp edges when cut. For warehouses, timber yards, construction sites and export packing stations that need to secure heavy or bulky goods, polyester-fibre strap is the practical replacement.

Types of polyester strap in this category

Four products cover a range from heavy palletised freight to hand-tied waste bales.

Composite Strap WG 13–32 mm (box of 2 rolls)

Composite Strap WG combines polyester yarn with a polypropylene coating. It is available in 13, 16, 19, 25 and 32 mm widths, wound on a Ø200 mm core. Roll lengths run from 300 m to 1100 m depending on width. System strength with a buckle ranges from 675 kg at 13 mm to 1750 kg at 32 mm. Each box holds 2 rolls. The strap is non-corrosive, has no sharp edges and suits outdoor storage and open transport. Width-matched buckles and a separate tensioning tool are required.

83 € – 96 €Price range: 83 € through 96 €View product →

Composite Cord Strap 13–32 mm (pallet of 90 rolls)

For high-volume sites the Composite Cord Strap pallet of 90 rolls provides the same composite material in bulk. Widths are 13, 16, 19, 25 and 32 mm, two rolls per carton. System strength with a buckle goes from 675 kg up to 1750 kg. Compatible buckles are needed to tension and secure the strap.

2.199 €View product →

Polyester Strap 16/19 mm on Ø76 mm core

Polyester Strapping 16/19 mm is made from interlaced polyester fibres. Choose 16 mm (850 m per roll) or 19 mm (600 m per roll); each pack holds 2 rolls on a Ø76 mm core. Tensile strength ranges from 300 kg to 1600 kg. It is fastened with metal clamps or phosphate terminals and tensioned by hand or with a pneumatic tool. Suited to woodworking, construction, mining and waste packing, the strap is chemical-resistant, weather-resistant and reusable, and it does not scratch or dent goods.

79 €View product →

Hot-Melt Textile Strap for Waste Bales

The Waste Bale Strap 16 mm is a hot-melt corded textile, 0.56–0.60 mm thick, with a 180 mm outer diameter. Linear breaking strength reaches up to 550 kg; system breaking strength up to 850 kg. Each roll provides 340 m and weighs 2.7 kg. The pack contains 4 rolls. This strap is tied by hand directly at vertical balers for cardboard bales. No buckles, seals or tools are needed.

89,20 €View product →

How to select the right strap

• Load weight. Heavy palletised loads call for composite strap in 25 or 32 mm with system strengths up to 1750 kg. Lighter loads or bundles may only need 13–19 mm.
• Width and fastener match. Widths span 13 to 32 mm. The buckle or clamp must match the strap width exactly.
• Fastening method. Composite strap closes with buckles. The polyester strap on a Ø76 mm core uses metal clamps or phosphate terminals. The waste bale strap is hand-tied without any fastener.
• Tensioning method. Composite strap needs a dedicated tensioning tool. The polyester strap on a Ø76 mm core can be tensioned by hand or with a pneumatic tool. The waste bale strap requires only hands.
• Coil format and volume. Boxes of 2 rolls on Ø200 mm core for regular use, pallets of 90 rolls for high throughput, or packs of 4 rolls for baler stations.
• Environment. Composite and polyester corded strapping resists moisture, chemicals and UV, making it a practical choice for outdoor yards and export routes.

Accessories you will need

Composite and polyester strap both require a closure and a tensioning device. Find buckles and clamps in our strapping seals section. For tensioning, pick a manual strapping tool for occasional jobs or a battery-powered tool for shift-long use. A strapping cart holds Ø200 mm composite coils upright and stops the strap from tangling as you move around a pallet.