Why You Need a TES PRO Spare Battery
The TES PRO spare battery is a direct replacement pack for the TES PRO 12–16 mm battery strapping tool. If you strap loads across a shift, you already know the problem: the tool’s battery runs flat, and work stops while it charges. Every minute of downtime is a minute your line, dock or yard stands still.
The Problem: Downtime While the Battery Charges
A single battery means the TES PRO sits idle during every charge cycle. On busy dispatch days or in production areas with continuous output, that gap adds up. Pallets queue, trucks wait, and your team loses momentum. The issue is not the tool itself but having only one power source for it.
- Strapping stops completely when the battery is flat.
- Operators may leave partly secured loads to deal with later.
- Scheduling around charge times wastes planning effort.
How a Spare Battery for the TES PRO Solves It
With a second battery on hand you simply swap packs: one works while the other charges. The dead battery goes into the charger supplied with your TES PRO, and the fresh one clicks straight into the tool. There is no reconfiguration and no adapter. This Li-ion cell has a capacity of 4.0 Ah at 14.4 V and is designed for the TES PRO 12–16 mm tool.
- Swap in seconds, resume strapping immediately.
- 14.4 V, 4.0 Ah Li-ion specification.
- Designed for the TES PRO 12–16 mm tool.
Where This Battery Fits and Where It Does Not
This battery is made for the TES PRO 12–16 mm battery strapping tool. Before ordering, confirm that the model printed on your tool reads “TES PRO”. If you use a different battery strapping tool, that tool has its own spare battery listed on its own page.
The spare battery is useful wherever the TES PRO is already in service and a single charge no longer covers the workload. If you run two or more TES PRO tools on the same site, keeping a shared pool of charged batteries can cut idle time further.
What to Check Before You Order a TES PRO Spare Battery
Go through this short list before placing the order:
- Confirm your tool model is the TES PRO 12–16 mm.
- Note that no charger is included. Use the charger supplied with your TES PRO tool.
- You receive one Li-ion battery (14.4 V, 4.0 Ah).
- No strap, seals or other consumables are part of this product.
If your charger is missing or faulty, arrange a replacement charger separately before the battery arrives.
